Programming Modbus TCP To RTU Converter Relay Output 2A Signal Lost Alarm

modbus tcp to modbus rtu converter, modbus rtu converter

System Feature

• Cortex M3 32-bit ARM
• Double watchdog to ensure stability
• With signal filtering mechanisms
• Network-reconnect and retransmission to ensure data accurately transmit
• Update RTC automatically or manually, clock source support Sms, NTP, CwtIO Server
• Can set multiple timers(second, minute, day, week, month) to execute actions, e.g. output, upload data, change setting
• Support Interlock programming, Event trigger
• Easy used GUI configure software for setting up to 100 parameters
• Optional exterior rechargable battery for 8-20 hours working when power lost

DI feature

• Monitor dry contact(NO or NC)

DO(T) feature

• Transistor output(drive voltage=power supply voltage, Drive current≤500mA)
• Remote or local event activate DO on/off/pulse
• Status memory function for power lost

DO(K) feature

• Relay output(NO, contact load: 2A / 125VAC,220VDC)
• DO can be activated by remote or local schedule
• Remain down status when power lost

AI feature

• Accept 4-20mA (option: 0-5V), Sampling frequency: 33Hz, 10-bit precision)
• Convert 4-20mA(0-5V) to physical value
• Configurable parameters for signal acquisition, alarm, data communication
• Signal lost alarm

SMS feature

• Can add 10 administrator numbers for alarm and remote control
• Any device alarm status can be sent by sending sms
• Editable alarm and recover sms with time stamp
• Remote get device status or value by sending sms command
• On/off/pulse output by sending sms
• Can set interval to report IO channel's status or value by sms
• Remote update parameters by sms
• Sms remind for sim card overdue
• Sms alar for power lost and recover

Wireless network communication

• Option network: cellular(2g/3g/4g) or Wi-Fi
• Communicate with up to 4 servers(IP or domain) by TCP/IP
• Automatically Upload data when alarm or according to schedule
• Communicate with server by optional Cwt_IO, Modbus TCP, http post protocol
• Support two-way data transparent transmission with RS485 or RS232

Modbus feature

• Polling salve over RS485 with modbus rtu protocol
• Can be a I O module to be read/write by modbus master
• Support Modbus RTU to TCP convert over Ethernet or GPRS/3G
  

modbus rtu ethernet converter

modbus serial to tcp converter

Programming Modbus TCP To RTU Converter Relay Output 2A Signal Lost Alarm Images